Use this tubing if your heater has a TAN nozzle adapter, and you need no more than 17 inches of tubing.

CAUTION: DO NOT use air tubing for fuel flow.

Click on the photo for more info.

Click on the photo for more info.

Click on the photo for more info.

Rubber fuel tank bushing

Note: get the correct cap!

Fits filler necks that measure 2 inch o.d.

Note: get the correct cap! Fits filler necks that measure 1 3/4 inch o.d.

Read more- click on the image

Read more- click on the image

Fits 90-200k btu heaters.

NOTE:See part number M12461-31 for the screws that are used to assemble to the motor.

NOTE: pump adjustment screws NOT included. See part number HA3020 for the pump adjustment kit.

Fits 30-70k btu heaters made by Desa. Approx 4" diameter.

NOTE:See part number M12461-31 for the screws that are used to assemble to the motor.

NOTE: pump adjustment screws NOT included. See part number HA3020 for the pump adjustment kit.

Read more- click on the image

Read more- click on the image

Approx 8 3/8"dia, 1.480 pitch, 5/16" shaft, 5 blades.

7inch OD, 5/16 inch shaft, 1 1/4 pitch, 6 blade.

7 3/8" dia, 1 7/16 pitch, 5/16" shaft, 5 blades.

10" Diameter, .860 pitch, 5/16" shaft..

8 3/8" dia, 1.58 pitch, 5/16" shaft, 5 blades.

Obsolete

Approximately 7 inch diameter, 1 3/8in pitch, 5/16 in shaft.

Fits Desa M30, R70D; Master B 30, B70; Co-op C30A; Koehring K30; Knipco F30; Dart DB30.

Fits some 90-newer 150k heaters 8 1/4" diameter.

Fits some 30-70k btu heaters.

Read more- click on the image

Read more- click on the image

NOTE: the HA3018 (PP218) kit is similar to the HA3017 Filter Kit. The Difference is in the fuel filters. The air filters are the same.

Fits: 66-150k btu, old style.

Read more- click on the image

Overall length 4 inches

Do not order this number. It has been replaced by M50876-05.

Overall length 2 15/16"

Click on photo for applications

Overall Length: 4 7/8". Replaces M29813-05.

Click on photo for applications

Overall length 3 3/8"

Click on photo for applications.

Overall length: 4 3/8" length.

Click on photo for applications

The HA1170 control/photocell tester provides a means of troubleshooting the forced air kerosene heater by verifying the operation of the ignition control and photocell.

Instructions included

Click on the photo for details.

Click on the photo for details.

Trim to fit.

Use with heaters that require fuel filter # HA3017 only.

Fuel resistant rubber tubing. DO NOT use tubing which is meant for airlines. It will turn gummy and leak when exposed to fuel.

Use with heaters that require fuel filter # HA3017 only.

Fuel resistant rubber tubing. DO NOT use tubing which is meant for airlines. It will turn gummy and leak when exposed to fuel.

Use with heaters that require fuel filter # HA3017 only.

Fuel resistant rubber tubing. DO NOT use tubing which is meant for airlines. It will turn gummy and leak when exposed to fuel.

Click on the photo for more info and applications.

Read more- click on the image

Read more- click on the photo

Fits some 200k wheelbarrow style models- click on the photo for specific models.

Read more- click on the photo

Fits some 100K & 150k wheelbarrow style models- click on the photo for specific models.

Click on the image for more info.

Click on the photo for more info.

Currently, there are 2 versions of this transformer. The photo may not be exact.

NOTE ***No longer available. Part has been replaced by 102482-01.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Match your broken ignitor to the image...look for this "L" shape. Yours will have YELLOW wires (maybe GRAY, maybe LIME GREEN). NOTE: if the wires on your ignitor are BLACK...then order # 102548-05.

If your manual refers to part # PP200...this is it.

Click on the photo for more info and applications.

No longer available. Discontinued by DESA - no replacment.

Click on the photo for more info

Use with part number 104458-01 thermostat, bi metal.

Use with part number 097657-03 thermostat.

Read more- click on the image

Read more- click on the image

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Replaced by 102001-33

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Do not order this number. It has been replaced by 097308-05

Replaced by 097308-06

Click on the photo for more info

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

Click on the photo for more info and applications.

The nozzle is stamped 100735-02.

The nozzle is stamped 100735-03.

Click on the photo for more info and applications.

The nozzle is stamped 100735-04

This nozzle replaces HA3026 (PP220).

The nozzle is stamped 100735-06.

Click on the photo for more info and applications.

The nozzle is stamped 100735-07.

Click on the photo for more info and applications.

The nozzle is stamped 100735-09.

Click on the photo for more info and applications.

The nozzle is stamped 100735-17.

Click on the photo for more info and applications.

The nozzle is stamped 100735-18.

This nozzle has been replaced by HA3008 (PP208).

Click on the photo for more info and applications.

The nozzle is stamped 100735-19.

Click on the photo for more info and applications.

The nozzle is stamped 100735-20.

Click on the photo for more info and applications.

The nozzle is stamped 100735-21.

Click on the photo for more info.

Read more. Click on the photo

The rubber hoses connect here.

Adapts nozzle to the rubber hoses.

The airline that fits the tan nozzle adapter is #Airline-Tan

The rubber hoses connect here.

Adapts nozzle to the rubber hoses.

Click on the picture for more info.

The rubber hoses connect here.

Adapts nozzle to the rubber hoses.

Click on the photo for more info.

The nozzle is stamped 100735-10.

Read more- click on the image for applications

Fits some HSI (hot surface ignitor) (glowbar) type heaters.

Read more- click on the image

Fits most HSI (hot surface ignitor) (glowbar) type heaters.

Fits spark plug type heaters.

Click on the photo for applications

4 pieces. spring, ball, plug, plug w/hole.

Older heaters- parts are BLACK. Now replaced with yellow.

Read more- click on the picture

Click on the image for more info

Click on the image for more info

Do not order this number. It has been replaced by 107850-01

Replaces Solid State Relay part number 097061. Fits most heaters that have a starter relay.

Click on the image for more information.

Click in the photo for more details.

Easily convert your hard to find 3/4" rotor to a 1/2" rotor.

If you only need the 1/2" rotor see HA3004.

Click on the photo for applications.

Fits heaters with a 1/2in thick rotor. Measure yours before ordering!

Click on the photo for applications.

Fits heaters with a 5/8in thick rotor. Measure yours before ordering!

Click on the photo for applications

Do not order this number. It has been replaced by 097528-01

Attach the upper shell to the lower shell and other applications. 1/2 inch long.

6 screws attach the metal pump end cover (M29608 and M50545, listed above) to the motor. 1 inch long.

Read more- click on the image

3/4 inch long sheet metal screw. Various applications on heaters.

Use this item to meet minimum order of $10. Enter number of 1 cent items required to meet the minimum charge.

Example: If $5 in merchandise is purchased the cart will not accept the order, so, enter a quantity of 500 to bring the $ total to $10

Note length of the electrode.

Click on the photo for more info.

Click on the photo for more info .

Click on the image for more info

Click on the photo for more information.

Thermostat

Use part number 104905-01 for the thermostat knob.

Click on the photo for more info

This is the old style transformer. Replaced by Ignition Device Kit 102482-01.